Care Instructions

Infant & Kids Collection

Congratulations on the purchase of your new Sleeptek product! We know your baby will enjoy it!

MEUSE BABY INNERSPRING CRIB MATTRESS

MEUSE BABY INNERSPRING CRIB MATTRESS

Warranty terms: 10 years

  • Install the mattress on a firm breathable base for proper support.
  • Mattress can be rotated every 3 months for a longer lifespan
  • Protect the mattress with a Meuse wool moisture pad or appropriate mattress pad.
  • For stains, use a non-toxic cleaner, or light dish soap. Do not allow the mattress to get wet.
  • Mattress can be placed in direct sunlight for aeration seasonally or to remove any odours.
MEUSE BABY RUBBER CRIB MATTRESS

MEUSE BABY RUBBER CRIB MATTRESS

Warranty terms: 10 years

  • Install the mattress on a solid wood base with breathing holes or a firm wood slat base. (Cannot be used on a mesh base or a metal slat base with springs.)
  • Mattress can be rotated every 3 months for a longer lifespan
  • Protect your mattress with a Meuse wool moisture pad, or appropriate mattress cover.
  • For stains, use a non-toxic cleaner, or light dish soap. Do not allow the mattress to get wet.
  • Do not place the mattress in direct sunlight or direct heat source.
YANTRA KIDS RUBBER MATTRESS

YANTRA KIDS RUBBER MATTRESS

Warranty terms: 3 years

  • Place the mattress on a Yantra wood slat foundation or an equivalent solid wood slat base. Slats should measure between 1-4 inches wide and be at a maximum of 3 inches apart. Consult with your local retailer if you are not sure about the support of your current foundation.
  • Mattress can be rotated every 3 months for a longer lifespan.
  • Protect your mattress with a Yantra wool moisture pad, or appropriate mattress cover.
  • For stains, use a non-toxic cleaner, or light dish soap.
  • Do not allow the mattress to get wet.
  • Do not wash the mattress
  • Do not place mattress in direct sunlight or direct heat source.
  • Do not install the mattress directly on the floor, or on a platform bed.
MEUSE BABY WOOL PROTECTOR

MEUSE BABY WOOL PROTECTOR

Warranty terms: 3 years

  • Hand wash in cold water
  • Hang to dry indoors
  • Do not put in dryer
  • To freshen, air as needed outside in direct sunlight
MEUSE TODDLER SHREDDED RUBBER PILLOW

MEUSE TODDLER SHREDDED RUBBER PILLOW

Warranty terms: 3 years

  • Keep the pillow clean by covering it with a pillow case. Eliminate odors by sprinkling with baking soda.
  • Shredded rubber core is washable in cold water. Hang core to dry on a breathable drying rack.
  • Do not expose pillow to direct sunlight or direct heat source
YANTRA KIDS SHREDDED RUBBER PILLOW

YANTRA KIDS SHREDDED RUBBER PILLOW

Warranty terms: 3 years

  • Keep the pillow clean by covering it with a pillow case. Eliminate odors by sprinkling with baking soda.
  • Shredded rubber core is washable in cold water. Hang core to dry on a breathable drying rack.
  • Do not expose pillow to direct sunlight or direct heat source

Kama Mattress Collection

Congratulations on the purchase of your new Sleeptek mattress. It will change the way you sleep. Enjoy!

Kama Firm – Kama Float – Kama Soft – Kama Flex Float – Kama Flex Lift – Kama Flex Plush

Kama Firm – Kama Float – Kama Soft – Kama Flex Float – Kama Flex Lift – Kama Flex Plush

Warranty terms: 20 years*

  • Make sure the rubber cores are correctly placed inside the cover.
  • Place your mattress on a Kotra foundation or an equivalent solid wood slat base. Slats should measure between 1-4 inches wide and be at a maximum or 3 inches apart. Consult with your local retailer if you are not sure about the support of your current foundation.
  • Do not install mattress directly on floor, or on a platform bed.
  • Protect your mattress with a Lugano Organic Cotton Mattress Pad Protector or equivalent.
  • Do not allow the mattress to get wet.
  • Do not wash the mattress.
  • For spot cleaning, unzip the outer cover of the mattress and gently scrub with a light soap and very little water. Air dry.
  • Removable cover can be aired out seasonally.
  • Do not place mattress in direct sunlight or direct heat source.
  • Flip the inner cores to extend the lifespan of your mattress.
  • Mattress casing can be environmentally dry clean if needed. Sleeptek is not responsible for the outcome of dry cleaning the cover.
Kotra Foundation

Kotra Foundation

Warranty terms: 20 years*

  • (With legs) Make sure that all legs provided are used to support the foundation correctly. If you don’t use the legs, make sure that the foundation is on a sturdy bed frame with a centre support for double/queen and king mattress sets.
  • (Without legs) Make sure that the foundations is on a sturdy bed frame with a centre support for double/queen and king mattress sets.
  • Do not allow the foundation to get wet.
  • Do not stand or jump on the foundation.
  • If needed, spot clean with a light soap and use very little water.

Sleeptek Accessories

Congratulations on the purchase of your new Sleeptek product! We know you will enjoy it!  Please follow these instructions carefully to ensure proper care of your new accessory.

PROTECTORS

Lugano Cotton Pad Protector

Warranty Terms: 3 Years

  • Machine wash in warm water by itself to keep from pilling. Machine dry on low to medium heat by itself or hang to dry.
  • Material is very stretchy. After drying the cover, place on the mattress and pull from corners to loosen fit.
PROTECTORS

Lugano Wool Moisture Pad

Warranty Terms: 3 Years

  • Warranty terms: 3 years
  • To freshen, air as needed outside.
  • Hand wash in cold water. Hang to dry indoors.
  • Do not put in dryer. Sleeptek is not responsible for any shrinkage.
COMFORTERS

Como Wool Summer and All Season Comforters

Warranty Terms: 3 Years

  • Air comforter twice a year by hanging outside in the fresh air. Place in direct sunlight.
  • The use of a comforter cover is recommended to keep your comforter clean.
  • Do not wash comforter. Spot clean if needed with a light soap and very little water. Air dry.
  • Environmentally dry clean if needed. Sleeptek is not responsible for the outcome of dry cleaning.
PILLOWS

Warranty Terms: 3 Years

Pasha Wool Pillow

  • Keep the pillow clean by covering it with a pillow case.
  • Air pillow seasonally
  • Eliminate odors by sprinkling with baking soda.
  • Do not wash wool core
  • Pillow case can be washed in cold water and hung to dry.
  • To increase pillow loft, place the pillow in the dryer with two tennis balls, set dryer on air or the coolest setting.
  • Pillow loft can be adjusted by unzipping the pillow core and removing or adding wool. Filling can be messy – we suggest to do it over a kitchen sink with a drain plug or outside.

Pasha Shredded Rubber & Contour Shredded Rubber Pillow

  • Keep the pillow clean by covering it with a pillow case.
  • Eliminate odors by sprinkling with baking soda.
  • Shredded rubber core is washable in cold water. Please ensure that the zipper is safely locked in place by clipping it with a safety pin to make sure the rubber filling does not come out of the case while washing. Hang core to dry on a breathable rack.
  • Pillow case can be washed in cold water and hung to dry.
  • Pillow loft can be adjusted by unzipping the pillow core and removing or adding rubber. Filling can be messy – we suggest to do it over a kitchen sink with a drain plug or outside.
  • Do not expose pillow to direct sunlight or direct heat source.
TOPPERS

Warranty Terms: 3 Years

Inari Wool Topper

  • Protect the topper with a mattress protector like you would protect your mattress.
  • Do not allow topper to get wet.
  • Do not wash your topper
  • Air out twice a year by hanging the toper outside in the fresh air. Place it in direct sunlight.
  • Rotate topper every 3 months to extend the lifespan of your topper.
  • Do not install topper directly on the floor.

Inari Rubber Topper

  • Protect the topper with a mattress protector like you would your mattress.
  • Do not allow your topper to get wet.
  • Do not wash your topper.
  • Do not expose complete topper to direct sunlight or direct source of heat.
  • Rotate  your topper every 3 months to extend it’s lifespan.
  • Do not install topper directly on the floor.

If you have any questions concerning our care instructions, feel free to contact us by phone or by e-mail.

SLEEPTEK TOLL FREE NUMBER: 1-888-413-4442
E-MAIL: INFO@SLEEPTEK.CA

Start typing and press Enter to search